Name: 630mm-7B Bearing Type Tubular Stranding Machine

630mm-7B Bearing Type Tubular Stranding Machine [CCCS: Central Computer Control System]

1.] Main specification: 1.1.) Type: Tubular rotor bearing surrounding type 1.2.) Application: Stranding of 7 wires for

1.2.1.) Copper wire: 1.3-4.5mm soft or hard wire 1.2.2.) Aluminum wire:1.7-4.5mm EC grade or alloy wire 1.2.3.) Steel wire: 1.0-4.0mm 1.2.4.) Insulated wire: 2.0-5.0mm

1.3.) Stranded cable dia: 15mm Max. 1.4.) Stranding direction: S & Z. 1.5.) Stranding pitch: 20-200mm by MMI+PLC control

100HP+40HP two motors synchronization control 1.6.) 6B cage rotating speed: 700Rpm Max. 1.7.) Max. line speed: MPM 1.8.) Cradle bobbin size: DIN-46397(or buyer’s option) 630/Odx355/IDx127/BDx475/Awx400/TWx140/PR 1.9.) Take up bobbin size: 1600mm 1.10.) Driven motor: 1.10.1.) Main rotor:HP DC motor 1.10.2.) Capstan : HP DC + 4Q Driver. 1.10.3.) (3) Take-up : HP AC + Inverter(Torque module). 1.11.) CCCS: Central Computer Control System. 1.12.) Operation panel: Touch screen type (Monitor) 1.13.) Safety cover: Compact hydraulic lifter type.

2.] Machine composition: 2.1.) 630mm center wire pay off stand ................................... 1 set 2.2.) 630mm 6B tubular stranding rotor.................................. 1 set 2.3.) Stranding die stand ........................................................ 1 set 2.4.) Performing rollers unit.................................................... 1 set 2.5.) Post former rollers unit................................................... 1 set 2.6.) Length counter ............................................................... 1 set 2.7.) 1000mm Dual wheel capstan......................................... 1 set 2.8.) 1800mm cantilever type take-up .................................... 1 set 2.9.) Lubricant circulation system........................................... 1 set 2.10.) Safety cover of machine .............................................. 1 set 2.11.) Motors with control panel ............................................. 1 set 2.12.) CCCS operation panel ................................................. 1 set 2.13.) Loading/unloading hoist ............................................... 1 set (option)

No.50 Lane 573 Ping-Dong Rd., Ping-Zhen City , Tao-Yuan County , TAIWAN , R.O.C. Tel : +886-3-4604789 Fax : +886-3-4604788 E_mail : sales@pan-pioneer.com Http://www.pan-pioneer.com

PAN-PIONEER Co., Ltd.

民鋒股份有限公司

3.] Standard spare parts: 3.1.) High speed fuse ............................................................. 3 pcs 3.2.) Carbon brush for DC motor............................................ 1 pc 3.3.) Brake shoes spare ......................................................... 6 pcs 3.4.) Sensor for auto counter ................................................. 1 pc 3.5.) Tool box ......................................................................... 1 set

4.] Detail specifications: 4.1.) Center wire pay off stand Type: shaft less type 4.1.1.) Drum size: DIN-46397

630/Odx355/IDx127/BDx475/Awx400/TWx140/PR 4.1.2.) Loading/unloading of bobbin: 4.1.3.) Positioning: bobbin slided on to the loading position 4.1.4.) Lock/un-lock: bobbin supported by two spindles on both sides of cradle, a

ratchet with hand lever to be provided

4.2.) Tension control: 4.2.1.) Type: Mechanical compensation type 4.2.2.) Wire tension: 5-50kg adjusted by spring coil 4.2.3.) Tension device:

a.) Tension brake: Special band rope for long life operation will be used in this tension device b.) Tension selection: A screw provided to adjust the spring coil pitch which a variety tension force can be obtain.

c.) Compensation of tension: A touch arm provided to touch the barrel of pay-off bobbin, the tension will be maintain constant during the barrel change from full bobbin into empty bobbin.

d.) Tension brake: Cast iron with rubber coated for bobbin side of wheel to get enough brake force without driven pin and easy loading of bobbin. 4.2.4.) Guide roller for wire path: a.) Guide roller: Use a lot of guide rollers in the bend portions of wire path to avoid the scrape out of wire surface b.) Guide die: Use a lot of tungsten carbide guide dies in the straight line of wire path to avoid the wire jump out from center c.) Path hole dia: 10mm/ID to be provided. 4.3.) 630mm-6B tubular stranding rotor. 4.3.1.) Type: Tubular type strander, the rotor supported by ball bearings which surrounding the tube outer diameter, there

are 6 sets of cradle laying inside the tubular rotor. 4.3.2.) Tubular rotor: 1000mm/OD, made of steel tube with excellent dynamic balance test. 4.3.3.) Tubular rotor support: by 3 pcs of special ball bearings

No.50 Lane 573 Ping-Dong Rd., Ping-Zhen City , Tao-Yuan County , TAIWAN , R.O.C. Tel : +886-3-4604789 Fax : +886-3-4604788 E_mail : sales@pan-pioneer.com Http://www.pan-pioneer.com