Name: 90mm PVC/XLPE Insulation/Sheathing Line [CCCS: Central Computer Control System]

1.] Main Specification:

1.1.) Application: PVC, XLPE insulation/sheathing.

1.2.) Dia. of screw: 90mm OD.

1.3.) Cable size: 5-25mm/OD.

1.4.) Cross head: Adjustable type For cable size 45mm/OD Max. (or buyer’s request)

1.5.) Operation panel: MMI+PLC (CCCS: central computer control system)

1.6.) Driven motor: HP DC motor

1.7.) Machine direction: Right Hand (Customer's option)

1.8.) Functions of "CCCS" system: MMI+PLB.

1.8.1.) Machine lay-out drawing

1.8.2.) Extruder layout drawing

1.8.3.) Capstan layout drawing

1.8.4.) Take-up layout drawing

1.8.5.) Extrusion temperature setting and indicating

1.8.6.) PVC/XLPE material temperature indicating

1.8.7.) Screw RPM display

1.8.8.) Line speed display

1.8.9.) DC motor RPM display

1.8.10.) DC motor Ampere display

1.8.11.) Cable length counting

1.8.12.) Failure indicating

1.8.13.) Speed or RPM percentage(%) display

1.8.14.) Pitch for take-up traverser display

1.8.15.) Recipe management system:

The parameters group can be set and stored in memory

thus, it would be able to recall the parameters once

it was stored in the memory by user, the parameters

of this group is shown as following:

1.8.16.) Extrusion temperature

1.8.17.) Cable diameter

1.8.18.) Number of pair of cable

1.8.19.) Potention meter position of extruder

1.8.20.) Potention meter position of capstan

1.8.21.) Potention meter position of take-up

1.8.22.) Potention meter position of traverser

1.9.) Operation direction: Right hand machine (from left to right)

2.] Machine Compositions:

2.1.) 2000mm Floor gate type pay-off stand..........................1 set

2.2.) Wire straightener............................................................1 set

2.3.) Vacuum device for X-head.............................................1 set

2.4.) 90mm extruder main body.............................................1 set

2.5.) 45mm/OD adjustable type X-head.................................1 set

2.6.) Temperature controller...................................................1 set

2.7.) Hopper dryer and auto-loader........................................1 set

2.8.) Laser dia. Detector meter..............................................1 set

2.9.) Water cooling trough......................................................1 set

2.10.) 5/30KV spark tester.....................................................1 set

2.11.) Kg haul off caterpillar .............................................1 set

2.12.) 2000mm floor gate type take up stand.........................1 set

2.13.) Motors with control panel.............................................1 set

2.14.) CCCS: MMI+PLC control system.................................1 set

2.15.) Spare parts..................................................................1 set