PAN-PIONEER Co., Ltd.

民鋒股份有限公司

4000KG Belt Type Caterpillar

15.] Main Specification

15.1.) Type: Up and down belt catching type with multi-pneumatic pressing shoes. 15.2.) Application: To haul-off of cable from cable making process. 15.3.) Haul speed: MPM with a 4-step gear selection. 15.4.) Effective length of tread: 2000mm X 150mm width 15.5.) Pulling force: Kg Max. at Kg/cm2 15.6.) Diameters of cable: 110mm Max. 15.7.) Synchronization control: CCCS system 15.8.) Counter system: Digital type length counter

16.] Machine Composition:

16.1.) Kg caterpillar ........................................................... 1set 16.2.) Pneumatic control ............................................................ 1set 16.3.) Transmission system ........................................................ 1set 16.4.) Length counter ................................................................. 1set 16.5.) CCCS operation/control system....................................... 1set 16.6.) HP AC Driving motor .................................................. 1set

17.] Detail of machine specifications:

17.1.) Type: Up and down belt catching type with multi-pneumatic pressing shoes. 17.2.) Case: Box type with 3.4M length, 1.8M height and 1.0M width, all parts are

installed inside the box. 17.3.) Pulling force: Kg 17.4.) Diameter of cable: 110mm Max. 17.5.) Effective length of tread: 2000mm: 17.6.) Haul-off speed: MPM with a 4-step gear selection. 17.7.) Belt: Double side rubber belt, 150mm length X 20mm width X 20mm thickness. 17.8.) Guide roller:

17.8.1.) Belt guide roller: there are a lot of guide roller on both side of belt to guide the belt. 17.8.2.) Cable guide roller: A 4 side guide roller stand to be installed on the inlet and outlet of the caterpillar.

17.9.) Pressing force: 17.9.1.) Up and down: Down by 8 sets of pressing shoes each side. 17.9.2.) Pressing shoe: 5 rollers on each shoe pressing the hauling belt to catch the

cable.

17.10.) Operation panel: 17.10.1.) To be installed on the front upper side of machine, included with air pressure gauge, air selectors and on/off switch.

9 / 14 Check out Http://www.pan-pioneer.com for our latest news TEL:+886-3-4604789 FAX:+886-3-4604788

PAN-PIONEER Co., Ltd.

民鋒股份有限公司

17.10.2.) Up and down pressing pressure are adjusted by air regulators. 17.10.3.) A side air cylinder push the idle wheels to adjust belt tension.

17.11.) Length counter: 17.11.1.) Type: Digital type with counter wheel. 17.11.2.) Counting Unit: 1M/Count. 17.11.3.) Material: Up counter wheel made of aluminium with ceramic coating, under

wheel is covered by rubber. 17.11.4.) A four roller guide roller to be fitted at inlet and outlet position of counter for wire centering. 17.12.) Transmission: HP AC motor + vector type inverter > 4-step gear selector > Worm gear > Caterpillar driving wheels. 17.13.) Air capacitor: To keep a constant pressure air source supply for cylinders, an air tank is provided inside the machine.

18.] Operation direction: Right hand ( from right to left ).

10 / 14 Check out Http://www.pan-pioneer.com for our latest news TEL:+886-3-4604789 FAX:+886-3-4604788