Name: 630mm Double Twist Bunching Machine

630mm Double Twist Bunching Machine

1.] Main specification: 1.1.) Type: Double twist bunching without back twist 1.2.) Application:

1.2.1.) Multiple wires bunching, up to 100 fine copper wires. 1.2.2.) 7B wires accurate construction of annealed copper wires stranding.

1.3.) Individual wire diameter: 1.3.1.) Flexible wire: multiple wires, up to 100 wires. 1.3.2.) 7 wires stranding:Max. (7/0.4mm – 1.04mm)

1.4.) Rotor speed: Rpm.Max. (Twist/Min) 1.5.) Stranding pitch: 11-60mm 1.6.) Take up bobbin size: 630mm/OD x 475mm/AW DIN. Max.(Or customer’s

request) 560mm/OD x 425mm/AW DIN. Min. 1.7.) Driven motor: HP AC motor c/w INVERTER

2.] Machine composition: 2.1.) 630mm-7B Flyer pay-off................... 1 set (Option) 2.2.) 630mm bunching machine ............... 1 set 2.3.) Length counter ................................. 1 set 2.4.) Bobbin loading/unloading ................. 1 set 2.5.) Wire broken detector ........................ 1 set

3.] Excluding items: 3.1.) 315mm-Multi-wire pay-off ................. 1 set(option)

4.] Standard spare parts: 4.1.) Lay pitch gears ................................. 1 set 4.2.) Steel bows with guider ..................... 1 pair 4.3.) Timing belt........................................ 1 set 4.4.) Flat belt ............................................ 1 set 4.5.) Tools for operation ........................... 1 set

1/3

PAN-PIONEER Co., Ltd.

民鋒股份有限公司

SPECIFICATION MS- SB-03A

5.] Detail specifications: 5.1.) Bunching machine: 5.1.1.) Die plate: a.) Type: ratchet adjusting type. b.) Guider die: 5mm ID. ceramic die. c.) Moving distance: 100mm Max. d.) No.of die holes: as per request. 5.1.2.) Stranding bow: a.) Type: Flexible bow type. b.) Material: spring steel with dynamic balancing test. c.) Guider die: a number of ceramic dies fixed on the wire path to reduce friction force between bow and wire during stranding. d.) Driven: each end of flyer driven by a timing belt through the counter shaft. e.) S & Z stranding:1) Changing the motor rotating direction by selector inside the control panel.2) Changing the take-up direction gear which mounted inside the machine. 5.1.3.) Capstan: a.) Type: dual wheel type. b.) Capstan dia: 150mm dia with 4 & 5 grooves c.) Stranding pitch: 11-60mm. or as per customer's option pitch changed by change gears. d.) Material: Made of carbon steel, surface with hard chrome plated. 5.1.4.) Take up cradle: a.) Type: shaftless type, drum locked by screw spindles on both sides of cradle. b.) Take up drum: (DIN-46397) 630/ODx355/IDx475/AWx400/TWx127/BD Max. (500kg) c.) Driven system: driven by capstan shaft through a pair of slip clutch to spooler. d.) Pulling tension: adjusted by springs of slip clutch. e.) Traverse: Bearing type traverser having a 400mm traversing stroke made in Europe. f.) Traversing pitch: 2-16mm, both stroke & pitch are adjustable. 5.1.5.) Rotor: a.) Main shaft: 2 pcs of main shaft are supported by stands separated on each end of machine with heavy duty bearings surrounded on it, a gear pump for oil lubrication is provided on each support stand. b.) Rotor brake: Magnetic type disc brake on the counter shaft for emergency stop of machine, braking time 4-6 seconds 5.1.6.) Safety cover: a.) Type: front door open type with two layers cover. Inner side made of anti-noise material, working noise not over than 80dB.

2/3

PAN-PIONEER Co., Ltd.

民鋒股份有限公司

SPECIFICATION MS- SB-03A

b.) There are a plastic glass windows on the front top side for easy inside viewing. c.) A 20 watts fluorescent lamp installed inside the safety cover.

5.2.) Length counter: 5.2.1.) Type: 5 figures digital type auto-counter. 5.2.2.) Counting unit: 1 meter/ counting 5.2.3.) Counting wheel dia: 159mm. with 2 pcs of sensor teeth 5.2.4.) Pulse detecting: 159π x 2=1M 5.2.5.) Auto stop: when the counter length has been reached machine will stop

automatically.

5.3.) Loading and unloading device: 5.3.1.) Front loading with hydraulic hand jack lifter. 5.3.2.) Loading capacity: Kgs Max.

5.4.) Auto stop device: 5.4.1.) In case of wire broken. 5.4.2.) In case of counter pre-set length has been reached. 5.4.3.) In case of safety covers out of position.

5.5.) Electric operation panel: 5.5.1.) Power source control 5.5.2.) Ampere/voltage meter 5.5.3.) INVERTER control panel 5.5.4.) Length counter 5.5.5.) Rotor RPM indicator 5.5.6.) Pilot lamps

3/3